Amazing Tips For Long Beach CA Boat Hull Cleaning

By John Baker


A boat hull is exposed to lots of abuse from different elements that make its cleaning process a difficult task to accomplish. Exposure to extreme weather and polluted water leads to corrosion. As such, the boat hulls should be regularly cleaned as one way of maintaining your vessel in a perfect working condition. Apart from making the hull smooth and shiny, it facilitates to fast movement of the vessel. Below are simple tips for Long Beach CA boat hull cleaning.

Hulls should be cleaned for at least four times in a year although this will depend on how regular the vessel is used. The best option for this exercise remains to be hiring of cleaning professionals whereas you can as well do it when you have the right equipment. Most experts clean them using scuba gear where they dive into the water and clean the most difficult parts of the system.

Hull cleaning is best done when the boat is floating in the water, and this requires a scuba gear to enable you to maneuver down there. Also, you cannot use soap for cleaning and remove stains, and you must buy some solutions that will facilitate quick washing. These products are available from major stores where your maintenance company can recommend the products you need for this task.

Mix the recommended cleansing solutions with water as directed by the manufacturer. However, you must read the labels correctly especially on the acidic solutions to avoid damaging your vessel. A low powered hose should be used for rinsing the cleaned parts of the hull. Moreover, mold, algae and build-up salt will be destroyed when you use the power hose. The hulls cannot maintain their beautiful appearance if they have some algae growing on them.

Soft sponges should be used in removing dirt and stains from the underside. The sponge should be big to allow you handle it properly when cleaning the hard to reach parts. In a bid to remove the stains, most people use a hard brush which interferes with the painting, and this could be dangerous. Stroke the sponge in a circular pattern using a heavy-duty cleaner.

Once the first round washing is accomplished, it is time to rinse all the parts. The rinsing must be done using a clean, soft fabric that will help remove any remains of acidic and salty content on the underside. Use fresh water when rinsing with the sponge. Before you leave the vessel for drying, use a power hose to apply pressure when rinsing the boat to remove traces of algae and molds.

Hull cleansing takes time and is not an exercise that can be carried in between breaks. It has to be planned where rental boats can be rescheduled to allow the washing happen. Also, during the exercise, you will notice parts of the vessel that need the attention of an expert. As such, leaks and breakdowns that are seen when it is too late will be controlled earlier saving your boat from capsizing or stalling in the sea.

Magnificent boats can be reduced to a few years of service due to the neglect of washing its hull. Most boats go through salty water which destroys the metallic part of the vessel. This leads to early breakage and aging denying you the best part of its operations.




About the Author: